Single Point Diamond Dressers

We are leading Single Point Diamond Dressers manufacturer in Pune, India. They are made of selected shaped diamonds, mounted (brazed) in a shank. Only one cutting edge is presented to the grinding wheel. We manufacture this Dressing tools with synthetic “A” Grade & Natural Diamond points only. Carat size of this Diamonds depends on the diameter & width of the grinding wheel. The proper selection of size and quality appropriate for a given application requires qualified and experienced judgment. The lower the feed rate, the finer the surface finish.

Diamonds are sensitive to shock and impact. The dresser must be clamped rigidly in place to avoid vibration once dressing begins. Depth of cut per stroke of the dresser must be 0.01-0.03 mm max. An ample supply of coolant should be applied directly to the diamond point before dressing begins, as the sudden application of coolant to the diamond once it has heated up can cause it to shatter. The diamond holder should not be set directly on the Center of the grinding wheel, but at an angle of 5-15° to the direction of rotation of the wheel. Turn the tool frequently 20 to 40 degrees to maintain a sharp point. This Diamond tools must be used in rotation system to increase efficiency.

We also deal with multipoint diamond dresser and various other diamond tools to cater our service in industry. Cluster Type Diamond Dressers consist of a number of small natural diamonds of good crystal character, set in a geometric patterns in single layer and sintered in to a special wear resistant bond. This tool replaces single point tool for heavy dressing requirements for coarse grinding wheels. Cluster type diamond dressers gives rapid-dressing without scoring and produce a consistent even surface on the grinding wheel.